CynkoMet N-235 Series, Instructions For Use And Operation

Page: 52 / 124

Cynko Met
N-233
52
Connecting cable of the electrical
system •
Warning triangle •
Signboard distinguishing slow-
moving vehicles
•
Rear bolt/hydraulic wall •
Deflector for A4VS-P adapter •
* - includes 22x24 flat wrench for adjusting chain tension of the floor conveyor and 17x19
flat wrench for unfastening side guards and adjusting tension.
6. Technical Support
When using the spreader, constant monitoring of the technical
condition and the execution of maintenance procedures is required to keep
the machine in good technical condition. Therefore, the user of the spreader
is obliged to perform all maintenance and regulatory tasks specified by the
manufacturer.
To ensure proper functioning and avoid serious failures, the spreader
must be kept in the proper technical condition and operated according to
the manufacturer's guidelines.
An important element of the operation is the daily maintenance of the
spreader (before commencing work), it foresees:
•
checking tightness of threaded joints (table no. 8),
•
checking the tightness of the hydraulic system
•
checking the tightness of the pneumatic system,
•
checking the correct operation of mechanisms (conveyor feed).
•
check the functioning of the brake system,
•
check the functioning of the electrical system,
•
checking and performance of lubrication, according to the instructions
(section 6.10),
•
checking the tire pressure (tab. 4),
•
checking all locks/latches (e.g. side walls), whether they are properly closed
and secured by pins, and that there is no risk of spontaneous opening.
All detected faults are to be removed as soon as they are detected.
Use of a faulty spreader may have serious consequences.