16
FASTENING YOUR CHILD’S SEATBELT
• Place your child in the child seat. Pull the three-point belt right out and feed it along the
belt buckle
(14)
in front of your child.
• Insert the belt tongue
(15)
into the belt buckle
(14)
. It must lock into place with an
audible “CLICK”.
• Next, place and tighten the lap belt
(16)
in the green colored lower belt guides
(17)
of
the child seat.
• Now pull the diagonal belt
(6)
firmly to tighten the lap belt
(16)
. The tighter the belt sits,
the better it provides protection from injury. On the side of the belt buckle
(14)
, the
diagonal belt
(6)
and the lap belt
(16)
must be inserted together in the lower belt guide
(17).
• The lap belt
(16)
should have been fed through the lower belt guides
(17)
on both sides
of the booster seat.
• Now feed the diagonal belt
(6)
through the upper belt guide
(18)
in the headrest
(12)
until it is inside the belt guide.
NOTE!
The three-point belt must only be passed through the designated routings. The belt
routings are described in detail in this manual and are marked in green on the car seat.
NOTE!
Teach your child from the start to always ensure that the belt is tight and, if
necessary, how to tighten the belt themselves.
Ensure that the diagonal belt
(6)
runs between the outside of the shoulder and the neck of
your child. If necessary, adjust the height of the headrest to change the position of the belt.
The height of the headrest
(12)
can still be adjusted while in the car.
WARNING!
Never twist the belt.
!
WARNING!
The lap belt
(16)
must run as low as possible on both sides along your
child’s groin to have optimum effect in the event of an accident.
!
17
15
CLICK!
6
17
16
12
6
6
18
12
17
6
16
6
14
17
16
14
