10
PLACING THE SEAT IN THE VEHICLE
SAFETY IN THE VEHICLE
NOTE!
On some car seats made of sensitive materials (e.g. suede, leather etc.), the use
of child seats may leave marks and/or cause discolouration. To prevent this, you can place
a blanket or towel underneath it, for example. Please also refer in this connection to our
cleaning advises in these usage instructions; these cleaning instructions must be observed
prior to using the seat for the first time.
Place the child seat on the appropriate seat in the car.
• Always ensure that the entire surface of the backrest
(2)
of the CYBEX SOLUTION S
i-FIX is placed against the backrest of the vehicle seat.
• If the headrest of the vehicle is in the way, pull it out all the way or remove it completely
(for exceptions to this, please refer to the section “POSITIONING THE SEAT
CORRECTLY IN THE VEHICLE”).The backrest
(2)
will perfectly adapt to practically any
recline of the vehicle seat
In order to guarantee the best possible safety for all passengers make sure that...
• the foldable backrests in the vehicle are locked in their upright position.
• when installing the car seat on the front passenger seat, adjust the vehcile seat in
rearmost position. When doing so, however, ensure that the upper pivot point of the
safety belt is behind the belt feed point of the child seat.
• you properly secure all objects likely to cause injury in the case of an accident.
• all passengers in the vehicle are buckled up.
WARNING!
The car seat must always be secured correctly with the vehicle belt
in the vehicle even when not in use. In case of an emergency brake or accident, an
unsecured car seat may injure other passengers or your.
!
WARNING!
The full surface of the backrest of the CYBEX child seat must be
against the backrest of the vehicle. To ensure maximum protection for your child, the
seat must be in a normal upright position!
!
WARNING!
Do not use any load bearing contact points other than those described
in the instructions and marked in the child restraint.
!
2
