Getting Started
23
Next, you must modify your PC’s network settings to enable it to communicate with the
SnapGear appliance.
Click
Start
->
Settings
->
Control
Panel
and double click
Network
Connections
.
Right click on
Local
Area
Connection
(or appropriate network connection for the newly
installed PCI appliance) and select
Properties
.
Select
Internet Protocol (TCP/IP)
and click
Properties
.
Figure 2-7
Select
Use the following IP address
and enter the following details:
IP address:
192.168.0.100
Subnet mask:
255.255.255.0
Default gateway:
192.168.0.1
Select
Use the following DNS server addresses
and enter:
Preferred DNS server:
192.168.0.1