4
CUES Inc.
,
LAMPII User Manual | LM903
35
www.cuesinc.com
,
11. To switch between MAINLINE / LATERAL / REAR VIEW video, perform one of the
following depending on your specific system:
• For a non-K2 system: A panel mounted toggle switch labeled “MAIN CAMERA” and
“REARVIEW CAMERA” will allow you to select which camera to view. NOTE: camera
switching is controlled by reversing light power polarity, with the “MAIN CAMERA” position
being positive polarity. Switch should be left in “MAIN CAMERA” position when rearview
camera is not being used.
• For a K2 system with game pad controller: Pressing the “VIEW” button will cycle the view
between the MAINLINE, LATERAL, and REAR-VIEW cameras, in that order. If a rear-
viewing camera has not been selected on the K2 Equipment Configuration Screen, the
view will toggle between the MAINLINE and LATERAL cameras only.
• For a K2 system with a CUES hand-held controller: Pressing the “MAIN CAMERA” button
will always switch the view to the MAINLINE camera, and pressing the “REAR CAMERA”
button will always switch the view to the LATERAL camera. However, if a rear-viewing
camera has been selected on the K2 Equipment Configuration Screen, pressing the “REAR
CAMERA” button a second time will switch the view to the REAR-VIEW camera.
LAMPII
REAR-VIEWING CAMERA
• WM375-1 - LAMPII Rear-Viewing Camera Assembly
• LM350-3 - LAMPII with spring push cable and rear view camera
• LM350-4 - LAMPII with fiberglass push cable and rear view camera
RETROFIT KITS:
SYSTEM CONFIGURATION:
•
For new systems: units are available as an option.
•
For existing systems, a factory upgrade is recommended if the rear housing does not include the
RVC mounting holes.
•
Requires LAMPII rear motor housing (LM281) and K2 firmware upgrade R021 or later, or a
panel-mounted toggle switch for non-K2 systems.
CONTROLLER INSTRUCTIONS - LAMPII RVC
The unique, illuminated &
rear-viewing color camera can
be used with steel and fiber-
glass systems.
