4
34
CUES Inc.
,
LAMPII User Manual | LM903
www.cuesinc.com
,
SYSTEM SET-UP & INSTALLATION
5.
Secure the 2 allen head screws at the rear of the unit.
6.
Align pin 1 and and insert the 12-pin connector from the mainline cable to the rear-view
camera cable.
7.
Install Tow Cable P/N LM388 with the loop capturing the rearview camera pigtail as
shown in the image below.
8. Adjust the cable clamp to ensure there is slack in both the retrieval and in-line positions.
For further instructions, refer to P/N LM388-INST.
NOTE: the rear view camera lights will remain ON at all times.
HOW TO INSTALL/REMOVE THE LAMPII RVC - CONTINUED
5
