4
12
CUES Inc.
,
LAMPII User Manual | LM903
www.cuesinc.com
,
SYSTEM SET-UP & INSTALLATION
CONNECT THE LAMPII TO THE TRUCK - CONTINUED:
3. Attach the tow cables to the strain relief on the gold cable, ensuring that the gold cable has at
least 3” - 4” of slack when the tow cables are taut.
1. Lay out the push cable and install the
camera and centering ball.
2. Pivot the camera head UP and insert the push
camera up through the bottom of the unit as
shown.
Refer to the Stainless Steel or Fiberglass Cable
instructions in this section, depending on your specific
configuration.
INSTALL THE PUSH CABLE
For Stainless Steel Push Cable Assemblies:
If you have the fiberglass push
cable assembly, refer to the
next procedure for installation
instructions.
1
2
NOTE
: Tow Cable P/N LM157 is recommended for use when the rear viewing camera is not used. Tow
Cable P/N LM388 is recommended when the rear viewing camera is used. Tow Cable P/N LM388 has an
extra loop which captures the rear view camera. Refer to the RVC installation instructions in this chapter
for further details.
