4
40
CUES Inc.
,
LAMPII User Manual | LM903
www.cuesinc.com
,
SYSTEM SET-UP & INSTALLATION
When operating the Mini Pan & Tilt Camera compatible LAMPII version, immobilizing the camera
head is accomplished with screws in P/N LM729, Mini Pan & Tilt Camera Guide, versus an
immobilization block in the standard version. P/N LM729 is provided with the system. Perform
the following to immobilize the camera head:
1.
Using an Allen Wrench, remove the screws on the side of the camera guide as
shown.
2.
Using the screw that was removed in Step #1, install it on the bottom of the
camera guide with an Allen Wrench as shown.
IMMOBILIZING THE CAMERA HEAD WHEN USING THE MINI PAN & TILT CAMERA
COMPATIBLE LAMPII VERSION
Mini Pan & Tilt Camera Guide,
P/N LM729
Remove screw from here
Then install screw here
