03/2008 - Art. Nr. 13 013 477C
16
TC
Start-up
Functions
Control panel TC
TC switch functions
A2
Standardised positions 48x48 or
48x96mm for power regulation
(option).
A4
Display
A4.1
Display dismantling window
B10
Flame current measuring bridge
[µA DC], located under
TC
DB9
Display information point, located
under
TC
F10 TC
fuse
S1
TC
main switch
0
Power off
1
Power on green indicator
H10
light on.
S2
Operation mode selection switch
'
Manual mode with
S3
Auto
Local automatic mode
S3
Operates coupled with switches
S29
&
- S2
'
+ / -
Flow increase/decrease
S5
Delocalized unit switch showing :
- fault, red indicator
H6
light on,
- reset button.
S29
Control location selection switch
&
Local mode
>
Remote control mode
(option)
Control panel TC
All control elements can be seen from
the outside.
A transparent removable lid, clipped on
cover, provides access to various
controls and commands that enable to
set, then operate burner.
Control panel
TC
also includes an
ionization power point, two green
indicators showing type of fuel used and
the control circuit protective fuse.
To remove lid, press one side or both
sides of
and pull towards you to free
it.
To put lid back, place in casing and
press both clips in.
A4 Display
If the display is the wrong way round,
reverse it in the following way:
• Unclip display by inserting a
screwdriver in
A4.1
window.
• Turn 180°.
• Clip display back onto the stand.
• Check that no foreign body will
interrupt
IR
(infrared) transmission
between the control unit and the
display.
Summary of Contents for C120 GX507/8
Page 40: ...03 2008 Art Nr 13 013 477C 40 1 pF VGD SKP 180 SKP 3 SKP 180 F D...
Page 42: ...03 2008 Art Nr 13 013 477C 42...
Page 44: ...03 2008 Art Nr 13 013 477C 44 5 1 1 6 F 5 6 5 0 5 3 1 3 6 5 6 3 0 3...
Page 54: ...03 2008 Art Nr 13 013 477C 54 D 1 RTC 2 J1 1 RTC 1 pF 2...