CUB CRAFTERS
SECTION 4
CC11-100
NORMAL PROCEDURES
Issued: 08/01/06
REPORT SC10000AFM
Date of Revision: 11/23/18
Page Number 4-13
4.3.3.6 Approach and Landing
4.3.3.6.1 Normal Landing
•
Fuel Selector ......................................................... Both
•
Seat Belts ...................................................... Fastened
•
Mixture ..................................................................... Set
•
Flaps ........................................................................ Set
INDICATED AIRSPEED (IAS)
MPH
KNOTS
Maximum speed first notch flaps (15°)
85
74
Maximum speed (>15°)
81
70
•
Trim ......................................................... As required
•
Speed ......................................................... As required
(1.3 times full flaps stall speed at gross weight is 42 mph or
36 knots IAS)
•
Doors and windows ........................................... Closed
4.3.3.6.2 Crosswind Landing
•
Fuel Selector ...................................................... Both
•
Seat Belts ................................................... Fastened
•
Mixture .................................................................. Set
•
Flaps ........................................... Set below white arc
INDICATED AIRSPEED (IAS)
MPH
KNOTS
Maximum speed first notch flaps (15°)
85
74
Maximum speed (>15°)
81
70
•
Trim ......................................................... As required
•
Speed ...................................................... As required
(A higher speed than normal is recommended)
•
Ailerons-Rudder ...................................... On short final
Use ailerons to keep upwind wing low
Rudder to hold runway alignment
•
Touchdown .... Do not drift sideways during touchdown
•
Landing Roll ............. Use ailerons to keep upwind wing
