CUB CRAFTERS
SECTION 1
CC11-100
GENERAL INFORMATION
Issued: 08/01/06
REPORT SC10000AFM
Date of Revision: 11/23/18
Page Number: 1-1
1
GENERAL INFORMATION
1.1
INTRODUCTION
This Pilot’s Operating Handbook contains information
required by the FAA and ASTM at the time the aircraft
was certified. It also has additional data which Cub
Crafters, based on its experience, has found useful.
This manual is the approved Pilot’s Operating Handbook
and it is part of the equipment that must be onboard the
aircraft whenever it is operated.
This manual is
not a substitute for adequate, competent
flight training, knowledge of current Safety Alerts, Service
Bulletins, and/or Notifications affecting the airplane or
applicable aviation regulations.
The pilot-in-command is responsible for determining
whether the airplane is safe for flight. She/he is also
responsible for ensuring that all operations are conducted
within the limitations defined by the appropriate FAA
regulations, this manual, the aircraft’s instrument
markings, and appropriate placards.
While it is intended that this manual be used in flight, it
must be studied regularly. The pilot must be familiar with
all limitations, performance data, procedures and
operational handling characteristics of the airplane prior
to operating the airplane.
The information in this manual is divided into numbered
sections, each of which is provided with a tab divider. The
order of the sections has been designed so that the
LIMITATIONS
and
EMERGENCY PROCEDURES
may
be looked up quickly. The
EMERGENCY PROCEDURES
section
has a red divider tab.
