SECTION 9.2
CUB CRAFTERS
SUPPLEMENT- SINGLE PLACE CONVERSION
CC11-100
REPORT SC10000AFM
Issued: 04/15/09
Page Number: 9-2-4
Date of Revision: 10/31/11
For Two Place Operation:
Rear seat must be installed.
Single Seat Placard must be removed
Maximum empty weight per Section 9.2.2.2.
9.2.2.2 EMPTY WEIGHT INFORMATION
The maximum empty weights as defined by ASTM and
FAA regulations are as shown in the table below. The
aircraft must always comply with the weights shown
below.
Max Empty Weight
(CC340 Engine)
Configuration
Wheels/Skis
900 lbs
Two Place
Wheels/Skis
1090 lbs
Single Place
Floats
1010 lbs
Two Place
Floats
1200 lbs
Single Place
Table 9-2-1 - Maximum Empty Weights
9.2.2.3 PLACARDS
This placard is designed to be fixed using “Velcro” and
must be present when equipped for single place
operation. This placard must be removed for dual place
operation. The placard may be installed on the
instrument panel or on the overhead tube near the
compass correction card.
Figure 9.2.1 - Single Seat Placard
