CUB CRAFTERS
SECTION 4
CC11-100
NORMAL PROCEDURES
Issued: 08/01/06
REPORT SC10000AFM
Date of Revision: 11/23/18
Page Number: 4-5
4.3.1.3 Left Fuselage, Wing and Landing Gear
•
Chocks .......................................................... Remove
•
Tire .................................................................. Check
•
Brakes and Lines ............................................. Check
•
Main Landing Gear Leg and Strut ................... Check
•
Fuel Tank ........................................... Check quantity
•
Fuel Cap/Vent .... Check vent is clear and cap secure
•
Pitot Tube ......................................... Check condition
•
Jury Struts and Brackets .................. Check condition
•
Stall Warning Vane .......................... Check operation
•
Landing Light (if installed) ................. Check condition
•
Aileron Control Cable ....................... Check condition
•
Tie Down ...................................................... Remove
•
Wing Strut ......................................... Check condition
•
Vortex Generators ........................................... Check
•
Wing Tip and Lights (if installed) ...... Check condition
•
Aileron Hinges ................................................. Check
•
Aileron Surface ................................. Check condition
•
Flap Hinges ..................................................... Check
•
Flap Surface ..................................... Check condition
•
Left Fuselage ................................................... Check
