CUB CRAFTERS
SECTION 9
CC11-100
SUPPLEMENTS- TWO-SWITCH
ELEVATOR TRIM SYSTEM
Issued: 03/13/12
REPORT SSC100000AFM
Date of revision: N/A
Page number 9-5-7
The switch should normally be kept in the FRONT
position to avoid inadvertent operation by an occupant in
the aft seat.
Similarly, if the switch is in the REAR position, operation
by the aft occupant will take priority over operation by the
forward occupant. The REAR position will normally be
used during flight instruction.
If the selector switch is turned to the OFF position,
neither occupant will be able to operate the elevator trim.