78
2.6.24 Syslog Command
Syslog command
Parameter
Description
Switch(config)# syslog
Enable system log function.
Switch(config)# syslog
server1 [A.B.C.D]
[A.B.C.D]
Specify the primary system log server IP
address.
Switch(config)# syslog
server2 [A.B.C.D]
[A.B.C.D]
Specify the secondary system log server IP
address.
Switch(config)# syslog
server3 [A.B.C.D]
[A.B.C.D]
Specify the third system log server IP
address.
No command
Switch(config)# no syslog
Disable System log function.
Switch(config)# no syslog server1
Delete the primary system log server IP
address.
Switch(config)# no syslog server2
Delete the secondary system log server IP
address.
Switch(config)# no syslog server3
Delete the third system log server IP
address.
Show command
Switch(config)# show syslog
Show current system log settings.
Switch(config)# show log
Show event logs currently stored in the
Managed Switch. These event logs will be
saved to the system log server that you
specify.
Syslog command example
Switch(config)# syslog
Enable System log function.
Switch(config)# syslog server1
192.180.2.1
Set the primary system log server IP address
to 192.168.2.1.
Switch(config)# syslog server2
192.168.2.2
Set the secondary system log server IP
address to 192.168.2.2.
Switch(config)# syslog server3
192.168.2.3
Set the third system log server IP address to
192.168.2.3.
2.6.25 VLAN Command
1. Create a 802.1q VLAN, port-based VLAN and a management VLAN rule.
VLAN dot1q command
Parameter
Description
Switch(config)# vlan dot1q-vlan
[1-4094]
[1-4094]
Enter a VID number to create a
802.1q VLAN.
Switch(config-vlan-VID)# name
[vlan_name]
[vlan_name]
Specify a descriptive name for this
VLAN.
Switch(config)# vlan
management-vlan [1-4094]
management-port [port_list] mode
[trunk | access]
[1-4094]
Enter the management VLAN ID.
[port_list]
Specify the management port
number.
Summary of Contents for FOS-3126-PLUS SERIES
Page 186: ...186 Restart DHCP service...
