37
Switch(config-acl-RULE)#
ingress-port [any | policy1-
8 | port]
[any | policy1-8 |
port 1~26]
Specify one option for ingress port
command.
“any”:
Specify
“any” to mean any
ports are ingress ports.
“policy1-8”:
Specify a policy that
applies to ingress port command. To
make this command work properly, you
must configure
“Switch(config-if-xx-
xx)# acl policy [1-8]
” command.
“port”:
Specify a port number (1~26)
as an ingress port.
Switch(config-acl-RULE)#
tag-priority [0-7]
[0-7]
Configure the tag priority for this ACL
rule. The allowable tag priority value is
between 0 and 7.
Switch(config-acl-RULE)#
vid [any |1-4094]
[any |1-4094]
Configure the VLAN ID filter function.
“any”:
Specify
“any” to mean any
VLAN ID.
“1-4094”:
Specify an existing VLAN
ID.
Switch(config)# acl rate-
limiter [1-14] [rate_pps]
[1-14]
Specify the rate limiter ID that you
would like to assign a rate value to it.
[rate_pps]
Assign the rate to this specified rate-
limiter ID.
The allowable rates are listed below.
0
:1pps |
1
:2pps |
2
:4pps |
3
:8pps |
4
:16pps |
5
:32pps |
6
:64pps |
7
:128pps |
8
:256pps |
9
:512pps |
10
:1kpps |
11
:2kpps |
12
:4kpps |
13
:8kpps |
14
:16kpps |
15
:32kpps |
16
:64kpps |
17
:128kpps |
18
:256kpps |
19
:512kpps |
20
:1024kpps
Specify “0” to denote 1pps and so on.
NOTE:
To view the rate list in CLI,
press
“?” key after the command. For
example,
“Switch(config)# acl rate-
limiter 2?
”
No command
Switch(config-acl-RULE)#
no action
Permit the action.
Switch(config-acl-RULE)#
no action port-copy
Disable port-copy function.
Switch(config-acl-RULE)#
no action rate-limiter-id
Disable rate-limiter function.
Switch(config-acl-RULE)#
no action shutdown
Activate the interface.
Summary of Contents for FOS-3126-PLUS SERIES
Page 186: ...186 Restart DHCP service...
