107
4.4.4.3 RSTP Physical Port Settings
Click the option
RSTP Physical Port Settings
from the
Rapid Spanning Tree
menu and then the
following screen page appears.
Configure Port State:
Select “State” from the pull-down menu of Select Setting.
This allows ports to be enabled or disabled. When it is On, RSTP is enabled.
Configure Port Path Cost:
Select “Path Cost” from the pull-down menu of Select Setting.
This sets up each port‟s path cost. The default value is “0”.
Summary of Contents for FOS-3126-PLUS SERIES
Page 186: ...186 Restart DHCP service...
