CTS FOS-3126-PLUS SERIES, User Manual

Page: 53 / 205

53
Switch(config)# lldp
interval [1-180] [1-180] Specify the time interval for updated LLDP packets
to be sent. The allowable interval value is between
1 and 180 seconds.
Switch(config)# lldp
packets [1-16] [1-16] Specify the amount of packets that are sent in
each discovery. The allowable packet value is
between 1 and 16 seconds.
Switch(config)# lldp tlv-
select capability Enable Capability attribute to be sent.
Switch(config)# lldp tlv-
select management-
address Enable Management Address attribute to be sent.
Switch(config)# lldp tlv-
select port-description Enable Port Description attribute to be sent.
Switch(config)# lldp tlv-
select system-
description Enable System Description attribute to be sent.
Switch(config)# lldp tlv-
select system-name Enable System Name attribute to be sent.
No command
Switch(config)# no lldp hold-time Reset the hold-time value back to the default
setting.
Switch(config)# no lldp initiated-delay Reset the initiated-delay value back to the default
setting.
Switch(config)# no lldp interval Reset the interval value back to the default setting.
Switch(config)# no lldp packets Reset the packets-to-be-sent value back to the
default setting.
Switch(config)# no lldp tlv-select
capability Disable Capability attribute to be sent.
Switch(config)# no lldp tlv-select
management-address Disable Management Address attribute to be sent.
Switch(config)# no lldp tlv-select port-
description Disable Port Description attribute to be sent.
Switch(config)# no lldp tlv-select
system-description Disable System Description attribute to be sent.
Switch(config)# no lldp tlv-select
system-name Disable System Name attribute to be sent.
Show command
Switch(config)# show lldp Show or verify LLDP settings.
Switch(config)# show lldp interface Show or verify each interface
‟s LLDP port state.
Switch(config)# show lldp interface
[port_list] Show or verify the selected interfaces
‟ LLDP port
state.
Switch(config)# show lldp status Show current LLDP status.
LLDP command example Description
Switch(config)# lldp hold-time 60 Set the hold-time value to 60 seconds.
Switch(config)# lldp initiated-delay 60 Set the initiated-delay value to 60 seconds
Switch(config)# lldp interval 10 Set the updated LLDP packets to be sent in very
10 seconds.
Switch(config)# lldp packets 2 Set the number of packets to be sent in each
discovery to 2.
Switch(config)# lldp tlv-select
capability Enable Capability attribute to be sent.
Switch(config)# lldp tlv-select
management-address Enable Management Address attribute to be sent.