66
Switch(config)# spanning-
tree max-age [6-200]
[6-200]
Specify the Maximum Age value in
seconds. The allowable value is between
6 and 200.
Switch(config)# spanning-
tree priority [0-61440]
[0-61440]
Specify a priority value on a per switch
basis. The allowable value is between 0
and 61440.
Switch(config)# spanning-
tree version [compatible |
normal]
[compatible |
normal]
Set up RSTP version.
“compatible”
means that the Managed
Switch is compatible with STP.
“normal”
means that the Managed
Switch uses RSTP.
No command
Switch(config)# no spanning-
tree aggregated-port
Disable STP on aggregated ports.
Switch(config)# no spanning-
tree aggregated-port cost
Reset aggregated ports
‟ cost to the
factory default.
Switch(config)# no spanning-
tree aggregated-port priority
Reset aggregated ports
‟ priority to the
factory default.
Switch(config)# no spanning-
tree aggregated-port edge
Disable aggregated ports
‟ edge ports
status.
Switch(config)# no spanning-
tree aggregated-port p2p
Reset aggregated ports to point to point
ports (forced_true).
Switch(config)# no spanning-
tree delay-time
Reset the Forward Delay time back to
the factory default.
Switch(config)# no spanning-
tree hello-time
Reset the Hello Time back to the factory
default.
Switch(config)# no spanning-
tree max-age
Reset the Maximum Age back to the
factory default.
Show command
Switch(config)# show
spanning-tree
Show or verify STP settings on the per
switch basis.
Switch(config)# show
spanning-tree aggregated-
port
Show or verify STP settings on
aggregated ports.
Switch(config)# show
spanning-tree interface
Show each interface
‟s STP information
including port state, path cost, priority,
edge port state, and p2p port state.
Switch(config)# show
spanning-tree interface
[port_list]
[port_list]
Show the selected interfaces
‟ STP
information including port state, path
cost, priority, edge port state, and p2p
port state.
Switch(config)# show
spanning-tree statistics
Show each interface and each link
aggregation group
‟s statistics information
including the total RSTP packets
received, RSTP packets transmitted,
STP packets received, STP packets
transmitted, TCN (Topology Change
Notification) packets received, TCN
packets transmited, illegal packets
received, and unknown packets
received.
Summary of Contents for FOS-3126-PLUS SERIES
Page 186: ...186 Restart DHCP service...
