54
Switch(config)# lldp tlv-select port-
description
Enable Port Description attribute to be sent.
Switch(config)# lldp tlv-select system-
description
Enable System Description to be sent.
Switch(config)# lldp tlv-select system-
name
Enable System Name to be sent.
Use
“Interface” command to configure a group of ports’ LLDP settings.
LLDP & Interface command
Parameter
Description
Switch(config)# interface
[port_list]
[port_list]
Enter several discontinuous port
numbers separated by commas or a
range of ports with a hyphen. For
example:1,3 or 2-4
Switch(config-if-PORT-
PORT)# lldp
Enable LLDP on the selected
interfaces.
No command
Switch(config-if-PORT-
PORT)# no lldp
Disable LLDP on the selected
interfaces.
Show command
Switch(config)# show lldp
Show or verify LLDP configurations.
2.6.12 MAC Command
Set up MAC address table aging time. Entries in the MAC address table containing source MAC
addresses and their associated ports will be deleted if they are not accessed within aging time.
MAC Command
Parameter Description
Switch(config)# mac address-
table aging-time [0-4080]
[0-4080]
Enter the aging time for MAC addresses in
seconds.
No command
Switch(config)# no mac
address-table aging-time
Set MAC address table aging time to the
default value (300 seconds).
Show command
Switch(config)# show mac
address-table
Show MAC addresses learned by the
Managed Switch
Switch(config)# show mac
address-table clear
Clear MAC address table.
Switch(config)# show mac
address-table interface
[port_list]
[port_list]
Show MAC addresses learned by the
specified interfaces.
Switch(config)# show mac
address-table mac [mac_addr]
[mac_addr] Show the specific MAC address
information.
Switch(config)# show mac
learning
Show MAC learning setting of each
interface.
Switch(config)# show mac
static-mac
Show static MAC address table.
Switch(config)#show mac
aging-time
Show current MAC address table aging
time or verify configured aging time.
MAC command example
Switch(config)#mac address-table aging-time
200
Set MAC address aging time to 200
seconds.
Summary of Contents for FOS-3126-PLUS SERIES
Page 186: ...186 Restart DHCP service...
