152
need to indicate a specific host IP address. If “Network” is selected, you need to indicate
both network address and subnet mask.
SIP Address:
Specify a source IP address.
SIP Mask:
Specify a source subnet mask.
DIP Filter:
Sel
ect “Any”, “Host”, or “Network” for destination IP filtering. If “Host” is selected,
you need to indicate a specific host IP address. If “Network” is selected, you need to
indicate both network address and subnet mask.
DIP Address:
Specify a destination IP address.
DIP Mask:
Specify a destination subnet mask.
ICMP Parameters
ICMP Type Filter:
This field is used to filter the ICMP type defined in the type field of the
ICMP header.
Select “any” to filter any type. If “Specific” is selected, you need to further
specify an ICMP type value.
ICMP Type Value:
Specify an ICMP type value.
ICMP Code Filter:
This field is used to filter the ICMP code defined in the code field of the
ICMP header.
Select “any” to filter any code. If “Specific” is selected, you need to further
specify an ICMP code value.
ICMP Code Value:
Specify an ICMP code value.
UDP Parameters
Source Port Filter:
Select “Any” to filter frames from any source port. If “Specific” is
selected, you need to further specify a source port number. If
“Range” is selected, you need
to further specify a source port range.
Source Port NO.:
Specify a source port number (0~65535).
Source Port Range:
Specify a source port range (The source port number is from 0 to
65535).
Destination Port Filter:
Select “Any” to filter frames to any destination port. If “Specific” is
selected, you need to further specify a destination port number. If “Range” is selected, you
need to further specify a destination port range.
Destination Port NO.:
Specify a destination port number (0~65535).
Destination Port Range:
Specify a destination port range (The source port number is from
0 to 65535).
TCP Parameters
Source Port Filter:
Select “Any” to filter frames from any source port. If “Specific” is
selected, you need to furthe
r specify a source port number. If “Range” is selected, you need
to further specify a source port range.
Summary of Contents for FOS-3126-PLUS SERIES
Page 186: ...186 Restart DHCP service...
