69
Switch(config)# show spanning-
tree status [port_list | llag]
[port_list |
llag]
Show the selected interfaces or link
aggregation groups
‟ statistics
information
Switch(config)# show spanning-
tree overview
Show the current STP state.
Spanning-tree & interface command example
Description
Switch(config)# interface 1-3
Enter several discontinuous port
numbers separated by commas or a
range of ports with a hyphen. For
example:1,3 or 2-4
Switch(config-if-1-3)# spanning-tree cost 100
Set the selected interfaces
‟ cost to
100.
Switch(config-if-1-3)# spanning-tree priority 0
Set the selected interfaces
‟ priority
to 0
Switch(config-if-1-3)# spanning-tree edge
Set the selected ports to edge ports.
Switch(config-if-1-3)# spanning-tree p2p
forced_false
Set the selected ports to non-P2P
ports.
2.6.20 Switch Command
Switch command
Parameter
Description
Switch(config)# switch sfp
temperature [0]-[70]
[0]-[70]
Specify the slide-in SFP module
‟s
safety temperature range. The
allowable range is between 0 and
70 degrees Celsius.
Switch(config)# switch sfp tx-bias
[400]
[400]
Set up slide-in SFP modules
‟ TX
bias value.
Switch(config)# switch sfp tx-
power [low_rx_power]
[high_rx_power]
[low_rx_power]
[high_rx_power]
Set up the low and high TX power
for slide-in SFP modules. The
allowable range for low and high
parameter is between -9999 and
99999.
Switch(config)# switch sfp rx-
power [low_rx_power]
[high_rx_power]
[low_rx_power]
[high_rx_power]
Set up the low and high RX
power for slide-in SFP modules.
The allowable range for low and
high parameter is between -9999
and 99999.
Switch(config)# switch sfp voltage
[3]-[3.6]
[3]-[3.6]
Set up voltage value for slide-in
SFP modules.
Switch(config)# switch bpdu 00-
0F [permit]
[permit]
Permit packets from the address
ranging from 0180C2000000 to
0180C200000F.
Switch(config)# switch bpdu 20-
2F [permit]
[permit]
Permit packets from the address
ranging from 0180C2000020 to
0180C200002F.
Switch(config)# switch bpdu 10
[permit]
[permit]
Permit packets from the address
0180C2000010.
Switch(config)# switch mtu [1518-
9600]
[1518-9600] bytes
Specify the maximum
transmission unit in bytes. The
allowable MTU value is between
1518 and 9600 bytes.
Summary of Contents for FOS-3126-PLUS SERIES
Page 186: ...186 Restart DHCP service...
