CTS FOS-3126-PLUS SERIES, User Manual

Page: 59 / 205

59
2.6.17 QoS Command
1. Set up QoS Control List (QCL).
QCL command Parameter Description
Switch(config)# qos qcl [1-26] [1-26] Create a QoS control list for
traffic classification.
Switch(config-qcl-LIST)# dscp [0-
63] [low | normal | medium | high] [0-63] Specify a DSCP value between
0 and 63.
[low | normal |
medium | high] Specify one priority level to
classify data packets.
Switch(config-qcl-LIST)# ether-type
[0xWXYZ] [low | normal | medium |
high] [0xWXYZ] Specify the ether type for this
QoS rule between 0x600 and
FFFF.
[low | normal |
medium | high] Specify one priority level to
classify data packets.
Switch(config-qcl-LIST)# tcpudp-
port [0-65535] port_list [low | normal
| medium | high] [0-65535]
port_list Specify a TCP or UDP port
number or several TCP/UDP
port numbers between 0 and
65535.
[low | normal |
medium | high] Specify one priority level to
classify data packets.
Switch(config-qcl-LIST)# tos [0-7]
tos_list [low | normal | medium |
high] [0-7] tos_list Specify a TOS priority value
from 0~7.
[low | normal |
medium | high] Specify one priority level to
classify data packets.
Switch(config-qcl-LIST)# vlan-id [1-
4094] [low | normal | medium | high] vlan-id [1-4094] Specify the VID to this QoS rule.
[low | normal |
medium | high] Specify one priority level to
classify data packets.
Switch(config-qcl-LIST)# 802.1p [0-
7] 802.1p_list [low | normal |
medium | high]
[0-7] 802.1p_list Specify a tag priority value
between 0 and 7.
[low | normal |
medium | high] Specify one priority level to
classify data packets.
No command
Switch(config)# no qos qcl [1-26] [1-26] Delete a QCL rule.
Switch(config-qcl-LIST)# no dscp
[0-63] [0-63] Remove DSCP value setting.
Switch(config-qcl-LIST)# no ether-
type [0xWXYZ] [0xWXYZ] Remove Ether-type setting.
Switch(config-qcl-LIST)# no tcpudp-
port [0-65535] port_list [0-65535]
port_list Remove TCP/UDP port setting.
Switch(config-qcl-LIST)# no tos [0-
7] tos_list [0-7] tos_list Remove TOS value setting.
Switch(config-qcl-LIST)# no vlan-id
[1-4094] [1-4094] Remove VLAN ID setting.
Switch(config-qcl-LIST)# no 802.1p
[0-7] 802.1p_list [0-7] 802.1p_list Remove 802.1p tag priority
setting.
Show command
Switch(config)# show qos interface Show or verify each interface
‟s
QoS configurations.
Switch(config)# show qos interface
[port_list] [port_list] Show or verify the selected
ports
‟ QoS configurations.