CRU WiebeTech Ditto Shark User Manual Download Page 34

Page: 34 / 35

Protecting Your Digital Assets

CRU Ditto Shark User Manual

13 TECHNICAL SPECIFICATIONS

Product Name

Ditto Shark

Data Interface Types &

Speeds

1000BASE-T EtherNet: up to 1 Gbps

DataPort DP20: up to 6 Gbps

eSATA: up to 6 Gbps

UHS-III SD Card: up to 624 MB/s

USB 2.0: up to 480 Mbps

Supported Drive Types

2.5 and 3.5-inch SATA HDDs and SSDs

DataPort DP20 Drive Support

2.5-inch SATA HDDs and SSDs

SD Card Slot Support

MMC, SD, SDHC, SDXC, UHS-I, UHS-II, UHS-III (mini- and micro- card types

are compatible with adapters)

Wifi USB Adapter Support

Wifi adapters with Atheros chipsets, and some Realtek chipsets

DP20 Carrier Torque

2.5-inch drives, M3 screws: 4 inch-pounds max.

Data Connectors

Two (2) eSATA ports

Three (3) 1000BASE-T Ethernet connectors

One (1) USB 2.0 connectors

One (1) SD Card slot

Supported File Systems

ext2, ext3, ext4, FAT32, HFS+, NTFS, XFS

User Interface

Four-line LCD controlled with four soft-touch menu navigation buttons or USB

keyboard

Browser-based Ditto interface allows for direct operation, remote operation, and

administration

Stealth Mode

Turns off all lights (LEDs/LCD)

Browser Compatibility

Chrome, Edge, Firefox, Opera, Safari

Hash Modes

None, MD5, SHA-1

Erase Modes

Clear Partition Table, Quick Erase

External material

All-metal construction

Operating Humidity

5% to 95%, non-condensing

Power Switch

2 position: On / Off

Power Input

40W 12V 3.33A DC barrel connector (center pin positive)

Power over Ethernet

PoE+ (30W)

Compliance

EMI Standard: FCC Part 15 Class A

EMC Standard: EN55024, EN55032

CE, RoHS

Product Weight

Unpopulated: 2.91 pounds (1.32 kg)

Populated: 3.16 pounds (1.43 kg)

Product Dimensions

5.63in W x 9.00in L x 1.62in H (143mm W x 229mm L x 41mm H)

Technical Support

Your investment in CRU products is backed up by our free technical sup-

port for the lifetime of the product. Contact us through our website,

www.

cru-inc.com/support

or call us at 1-800-260-9800 or +1-360-816-1800.

Summary of Contents for WiebeTech Ditto Shark




































Search results

Summary of Contents for WiebeTech Ditto Shark

Reviews:

Related manuals for WiebeTech Ditto Shark

Brands by name

Popular brands

CRU WiebeTech Ditto Shark, User Manual

Search results

Summary of Contents for WiebeTech Ditto Shark

Reviews:

Related manuals for WiebeTech Ditto Shark

Brands by name

Popular brands