CRU WiebeTech Ditto Shark User Manual Download Page 33

Page: 33 / 35

Protecting Your Digital Assets

CRU Ditto Shark User Manual

f. The Ditto Shark will download the file to itself. Once downloaded, it will ask you to confirm the upgrade.

Click

Continue

. After the upgrade is finished, click

g. The LCD panel of the Ditto Shark will ask you to reboot. Press the

Enter button

on the face of the unit

to reboot, or click on the

Reboot button

on the “Utilities” screen.

METHOD 2: DOWNLOAD TO YOUR COMPUTER

a. Go to the firmware updates webpage and scroll down to the “Ditto Shark Firmware Links” section.

b. Click on the firmware you wish to use to upgrade to download the file. Save the file in a convenient

location.

c. Log into your Ditto Shark’s Browser Interface, navigate to the “Utilities” screen, and click on the top

Upload... button

d. Locate the firmware file you just downloaded, select it, and click

Open

e. Click on the

Firmware Upgrade button

f. The Ditto Shark will upload the file to itself. Once uploaded, it will ask you to confirm the upgrade. Click

Continue

. After the upgrade is finished, cick

g. The LCD panel of the Ditto Shark will ask you to reboot. Press the

Enter button

on the face of the unit

to reboot, or click on the

Reboot button

on the “Utilities” screen.

METHOD 3: UPLOAD VIA A USB THUMB DRIVE

a. Go to the firmware updates webspage and scroll down to the “Ditto Shark Firmware Links” section.

b. Click on the firmware you wish to use to upgrade to download the file. Save the file to a USB thumb

drive.

c. Insert the thumb drive into the “NetTap Interface” side USB port of the Ditto Shark.

d. The Ditto Shark will immediately scan the thumb drive and display a list on the LCD screen of all firm-

ware files found on the drive. Use the navigation buttons on the face of the unit to move the blinking
cursor to the firmware that you wish to use to upgrade, and then press

Enter

e. The Ditto Shark’s firmware will be upgraded. The LCD panel of the Ditto Shark will ask you to reboot.

Press

Enter

to reboot.

Summary of Contents for WiebeTech Ditto Shark




































Search results

Summary of Contents for WiebeTech Ditto Shark

Reviews:

Related manuals for WiebeTech Ditto Shark

Brands by name

Popular brands

CRU WiebeTech Ditto Shark, User Manual

Search results

Summary of Contents for WiebeTech Ditto Shark

Reviews:

Related manuals for WiebeTech Ditto Shark

Brands by name

Popular brands