SMI21
85
12.1.6.
Expert Program V103
12.1.6.1. Description
Expert program V103 is used to:
- Create speed profiles with analog or PWM control.
- Force speed control to one of the 3 preprogrammed speeds.
- Set the acceleration/deceleration phase parameters via the HMI.
12.1.6.2. "
Inputs
" Tab Parameters
Combinations of digital inputs 1 to 3: Used to choose the type of speed setpoint applied at the motor input:
- If no input is active, the setpoint will be that applied to input 6.
- If one of these 3 inputs is active, the setpoint will be the priority speed associated with this input.
N.B.: If more than 1 input In1 to In3 is active, the setpoint taken into account will be that for input 6.
Figure
111
Combinations of digital inputs 4 and 5: Used to choose the motion to be performed from the 4 actions
indicated below.
Figure
112
