SMI21
80
12.1.5.5. Type 3 "
Outputs
" Tab Parameters
Setting the parameters of frequency output 1 "Real speed": The parameters can be set for the signal
frequency of this output for which the motor runs at 1000 RPM (200, 500 or 1000 Hz).
Figure
96
State of digital output 2 "Real direction": Used to find out the motor direction of rotation.
Figure
97
State of digital output 3 "Motor Running": Used to find out whether the motor is stopped or running.
Figure
98
State of digital output 4 "Error": Used to find out whether an error has been detected.
Figure
99
