SMI21
161
=>
Measure the brake holding torque using a torque wrench.
=>
Compare the value with the holding torque indicated on the technical data sheet.
=>
If the holding torque is markedly different from the stated values, turn the motor shaft by hand 25 turns in
both directions.
=>
Repeat the operation. If the holding torque has not been restored after 3 repeat operations, please
contact your vendor.
15.4.
Replacing the Motor
=>
Disconnect all the supply voltages. Make sure that no other voltage is applied (safety instructions).
=>
Mark all connections and demount the product.
=>
Replace it with a motor with the same part number.
=>
Install the new product as described in section 4 "Installation".
=>
Commission the product as described in section 5 "Commissioning".
15.5.
Dispatch, Storage, Disposal
Comply with the ambient conditions described in the "TECHNICAL SPECIFICATIONS" section.
Dispatch
Protect the product against shocks during transport.
Use the original packaging for this purpose.
Storage
Only store the product in the stated permissible ambient conditions in terms of temperature and air humidity.
Protect the product against dust and dirt.
Disposal
The product is made up of various materials that can be reused or are suitable for separation and recycling.
Dispose of the product in accordance with local regulations.
