SMI21
33
9.3. USB Connection
USB connection requires a type B micro-USB socket on the motor.
The cable must be less than 3 m long.
Possible cable part number: MOLEX 68784-0003.
Connection procedure
•
Carefully remove the black stopper from the motor to reveal the Micro USB-B connector. The
stopper has a retainer to keep it attached to the motor.
Figure
6
Figure
7
•
Insert the USB cable and install the drivers as instructed.
Take care never to touch the connector or contacts inside the motor with your fingers or any inappropriate
object.
Once finished, it is essential to replace the stopper carefully, to maintain the motor seal and protect the
connector from any contact.
Simply pressing your finger in the middle of the stopper will close it properly.
Figure
8