Crestron
RoomView
Software
If the configuration is offline, then the
File List
will display 127 blank entries.
To add WAV files to the file list, double-click a blank entry (or right-click a
blank entry and select
Choose File
). Browse to the WAV file and click
Open
. If
the file is in the supported format (PCM, 8000 Hz, 16 bit, mono) it will be added
to the file list preceded by a
icon, denoting that the file resides on disk,
rather than on the CNXTA card. The information here includes fields for File#
(position), Name, Date, and Length in seconds. (If the file is not in the supported
format an error message will be generated.)
To hide blank entries, click
Hide Empty File Positions
. To display the full path
of each WAV file click
Show Full Path for Files on Disk
.
When all the desired WAV files have been added to the file list, they can be
uploaded to the CNXTA simply by clicking
Send New Files to CNXTA
while
working in online mode.
To change the position of a file in the list, right-click it and select
Move
. Then
choose an unoccupied position and click
OK
.
To remove a file from the list, right-click it and select
Delete
.
Entire file lists can be saved and retrieved by using the
Export
and
Import File
List
commands. To save a file list, click
Export File List
and browse to the
target directory, then name the file and click
Save
. It will be saved as an XTA
file.
To retrieve an XTA file, click
Import File List
, browse to the file and select it.
Here the
Count
field will display the number of WAV files in the selected XTA
file, while
File Position Range
will display the range of positions. For example,
an XTA file might hold five WAV files, taking up positions 1 through 5. Click
Open
to add the entries to the file list.
Sometimes multiple XTA files must be uploaded to the CNXTA. It is possible
that the entries in one file list will overlap with those in another file list. With
the example just described, there may be a second XTA file holding seven WAV
files that take up positions 1 through 7. To accommodate this second file list,
enter an offset value of 5 in the
Offset File Position
field. This will move the
entries up five positions, so that the new range will be from position 6 through
position 12.
Assign Serial Number
Function not yet defined.
Assign Cresnet ID by Serial Number
Function not yet defined.
Serial Number/TSID Conversion Tool
Function not yet defined.
e-Control 2 Activation
Function not yet defined.
Reference Guide – Doc. 6133
Crestron RoomView
•
65
