Software
Crestron
RoomView
In X-Generation control systems, this option will display the same information
as with a
Hard Reset
, in addition to any errors generated during program
transfer. (These errors will not be displayed using the
Hard Reset
command.)
Character Mapping
Character mapping is used to control how incoming and outgoing data is
displayed (when the
Display in Hex Mode
option is not enabled). The
“Character Mapping” window is divided into three areas, according to the range
of ASCII character values (Refer to “ASCII Conversions” on page 74):
1.
Low Characters
controls the display of characters with ASCII values
below 20 hex. These characters represent commands, such as <
Esc
> or
<
Line Feed
>.
•
The
Normal
option will display the ASCII equivalent of the
character.
•
The
Translated
option will display the character represented by
control and function keys. For example, <
Ctrl+@
>, which
corresponds to the NULL character, would be displayed as
<
NUL
>.)
•
The
Hex
option displays the character in hexadecimal notation.
•
The
Always Interpret CR, LF, and TAB
option interprets carriage
returns, line feeds, and tabs as Viewport-specific commands, and
the characters themselves will not be displayed.
2.
Standard Characters
pertains to characters with values between 20 hex
and 7E hex. These can be displayed either in ASCII (click the
Normal
check box) or hexadecimal notation.
3.
High Characters
pertains to characters with values above 7E hex.
These can be displayed either in ASCII (click the
Normal
check box) or
hexadecimal notation.
Each range of characters can be displayed or hidden by selecting or clearing the
corresponding
Show
check box.
Font
Sets the font, style and point size for Viewport characters. A preview of the
resulting text is displayed in the
Sample
area.
Split Window (Alt+W)
Viewport data can be displayed in a split window arranged vertically or
horizontally, with
Incoming
data displayed in one pane and
Outgoing
data
displayed in the other.
1. Point
to
Split Window
, then click
Horizontal
or
Vertical
. To display all
data in one window, click
Off
. Alternatively, press <
Alt+W
> to cycle
through each mode.
2. To resize the split window panes, position the cursor along a border or
corner, and drag to the desired size.
54
•
Crestron RoomView
Reference Guide - DOC. 6133
