Software
Crestron
RoomView
Enter a time in seconds for the connection to be attempted before hanging up.
Click the
Drop DTR
check box to close the connection by turning off the Data
Terminal Ready signal. Finally, click
Turn Modem Speaker Off
to disable the
sound of the modem connection.
Communications Presets
Communications presets are shortcut keys or key combinations that can be used
to specify communications settings automatically. That is, once a preset is
configured, pressing the key combination will set the associated
communications parameters (for either RS-232 or TCP/IP).
1. Point
to
Communications Presets
and then click
Add
.
2. Type a name for the preset, and then select the desired key combination
from the
Hotkey
drop-down list.
3. Click
the
Communication Settings
button and set the desired
parameters. Click
OK
.
4. Click
OK
again to exit or to assign another preset.
After a preset is configured it can be deleted or changed by pointing to
Communications Presets
and selecting
Remove
or
Modify
.
Restore Defaults
The
Restore Defaults
command restores the following default settings:
•
Viewport screen set to default size and position.
•
Split Window mode is turned off.
•
Font = Terminal (9 pt).
•
Local Echo is enabled.
•
Display in Hex Mode is disabled.
•
Show Program Load Output is disabled.
•
Character Mappings are set to defaults.
•
CR to CR/LF is enabled.
•
Sound is enabled.
•
Destructive Backspace is enabled.
•
Auto Baud Search is enabled.
Viewport: Diagnostics Menu
Use the
Diagnostics
menu to get information about the control system and
network devices, and to determine whether communication exists between the
control system and the PC.
Establish Communications (Find Rack)
Verifies communication between the control system and the PC, and
synchronizes the baud rates when they differ.
56
•
Crestron RoomView
Reference Guide - DOC. 6133
