8
Peristaltic Pumps Series IP 100-800
1. General
The following instructions refer only to the pump.
Since the pumps will be used in combination
with other assemblies, such as couplings,
transmissions and motors, you must also strictly
observe and comply with the operating and
maintenance instructions for these components
as well as the corresponding notes on safe and
reliable operation.
Schematic installation for peristaltic
pumps:
Fig. 1 Standard installation
1
Suction side
3 Identification plate
2
Pressure side
These on-hand instructions contain information
for installation, operation and maintenance of
ELRO peristaltic pumps.
You should therefore thoroughly read these
instructions before use and always follow the
information contained therein.
All personnel involved in activities on pump or
equipment associated with the pump must have
read this manual, especially the chapter ”Safety”
before starting work.
This also applies to persons who work on the
pump only occasionally, e.g. for maintenance
and cleaning work.
Each pump is subjected to stringent inspections
and function tests before leaving the factory.
You should always bear in mind that the
function, long lifetime and optimal operational
reliability of the pump mainly depend on
• correct installation
• correct commissioning and
• proper and scheduled maintenance.
Enquiries concerning service, spare parts or
repairs should be addressed to the
manufacturer or an authorized dealer.
Always provide the following information:
• Series
• Pump size
• Serial number of pump
This information is stamped on the identification
plate on top of the pump.
When returning pumps or pump parts to the
manufacturer or an authorized dealer for repair
or overhaul, the delivery must be accompanied
by a certificate stating that the pump is free of
product or other aggressive or hazardous
substances.
1
2
3
Summary of Contents for ELRO IP 100
Page 4: ...4 ...
