CABRIOLE’
CRAMARO TS S.r.l. – 37044 COLOGNA V.TA (VR) - VIA QUARI DESTRA, 71/G TEL. +39 0442/411688 / FAX + 39 0442/411690
E-MAIL [email protected] WEBSITE: http://www.cramaro.com -
Manual n° MCA016-EN-ED00 – date 15/01/15
page
35
3
2
1
FIG 55
FIG 56
M+
B+
B-
M-
STD. CONTROL UNIT CODE 4WCE4C03031A
CONNECTION DIAGRAM
TO THE MOTOR
1) CONTROL UNIT
2) BATTERY FEED CONNECTOR
3) ELECTRICAL CONTACT UNIT
TO THE
CONTROL
UNIT
CONTROL UNIT ELECTRICAL CONNECTION
The control unit has
4 connection elements
2 for the motor and 2 for the battery
The connection must be carried out with two
electric cables, one of which is directed to the tarpaulin
motor,
while the other, to the power supply circuit.
Both cables are clamped by cable glands inside
a plastic boss equipped with waterproof gasket.
CONNECTION DIAGRAM
Staple the FASTON cables with eyelet
on the cables on which
the insulation has been removed beforehand.
Feed the cables through the cable glands and the holes
in the control unit plastic boss
Then insert the FASTONS on the related control unit pins
as shown in the figure and tighten the nuts.
Secure the plastic boss to the body of the
control unit with the 4 screws supplied and
