CABRIOLE’
CRAMARO TS S.r.l. – 37044 COLOGNA V.TA (VR) - VIA QUARI DESTRA, 71/G TEL. +39 0442/411688 / FAX + 39 0442/411690
E-MAIL [email protected] WEBSITE: http://www.cramaro.com -
Manual n° MCA016-EN-ED00 – date 15/01/15
page
47
FIG 75
FIG 76
2
2
FIG 77
1
2
1
2
The metal rope inserted in the lower side pocket of the tarpaulin sheet must also be hooked to the inclined bracket;
said rope makes sure the sheet extends and
remains well-extended when using the vehicle.
The
assembly detail of this element allows you to
understand how it must be properly
positioned and secured on the CAB-SHIELD near
the front pulling pulley and how the side rope coming out of the lower
side edge of the sheet
must be secured
Again for
sheet TYPE - C, like for the front,
an
inclined BRACKET
is to be applied
on the
last tarpaulin bow
(both sides), which
allows the metal rope inserted in the lower pocket
of the tarpaulin side strip to be hooked
1)
LAST TARPAULIN BOW
2)
SHEET TENSIONER CORD
INCLINED ANCHORING BRACKET
(both in front and back)
•
Insert the thimble in the specific slot on the sheet guide
ROPE THIMBLE
FRONT INCLINED BRACKET REAR INCLINED
BRACKET
ON LAST BOW
