![COX CXO300 Installation Manual Download Page 6](http://html1.mh-extra.com/html/cox/cxo300/cxo300_installation-manual_2674296006.webp)
6
CXO300
INSTALLATION MANUAL
3.0 REMOVAL OF OUTBOARD ENGINE
3.0
REMOVAL OF OUTBOARD ENGINE FROM THE CRATE
3.1.0
Attach the applicable straps or chains to the correct points on the metal transportation crate
(Figure 3.1a)
Figure 3.1a. Points for attaching straps and steps for lifting the metal transportation crate with
outboard to a vertical position.
3.2.0
Using a gantry crane (or A-frame gantry crane) lift the crate to a vertical position.
3.3.0
Remove the straps or chains from the crate.
3.4.0
Remove the propeller shaft steady bar.
3.5.0
Remove the two long vertical rails.
3.6.0
Remove the top frame from the crate.
3.7 REMOVAL OF OUTBOARD TOP COWL
3.7.1
Open the three latches that hold the top cowl to the outboard.
3.7.2
Remove the outboard top cowl and stow it safely; if working on multiple outboard, ensure cowls
are labeled.
3.7.3
Close the three latches that hold the top cowl onto the outboard.
3.8.0
Remove the lifting eye cover from the top cover.
3.8.1
Use the applicable torx drive to remove the torx screws (2).
WARNING
If you are working on multiple outboards, make sure each cowl is marked for install to its initial outboard.
CAUTION
If you use an incorrect torx driver, it will damage the torx screw head.