29
CXO300
INSTALLATION MANUAL
6.0 STEERING
6.0 STEERING
6.5.2
Measure distance B, then choose spacer from table. Record the measurements in table 6.5.5.
Figure 6.5b. Steering actuator install guide - threaded end spacers
6.5.3
Install the steering actuator assembly to the PTT with the selected spacers fitted and measure
the gap.
6.5.4
If no gap exists, tighten the assembly to 60Nm holding the nut at the other end of the bar
with a spanner. If a gap still exists, change spacers as appropriate until no gap exists, Record
the measurements in table 6.5.5
6.5.5
Record depth measurement for each end in four places and take an average to select the
correct spacer size.
CXO300 Outboard Steering Actuator Install Guide - Step 2: Threaded end spacers selection
What is measured length B?
B≤3,5
3,5<B≤ 3,75
3,75<B≤4
4<B≤4,25
4,25<B≤ 4,5 4,5<B≤ 4,75
4,75<B≤5
5<B≤5,25 5,25<B≤ 5,55
Selected Spacer Thickness
Combinations (mm)
036539
(thickness marked on spacers)
T = 3,75
T = 4,00
T = 4,25
T = 4,5
T = 4,75
T = 3,75
+
T = 1,25
T = 4,00
+
T = 1,25
T = 4,25
+
T = 1,25
T = 4,25
+
T = 1,25
A
D
B
C
TOP
Position
Welded End - Step 1
Threaded End - Step 2
A
B
C
D
Average
Fitted Spacer
