CORVUS TERRAIN DX4 PRO, User Manual

Page: 50 / 80

50 We reserve the right to modify the product and the design.
USER
MANUAL
engine oil (change and filter)
You should keep the oil at the optimum level and change it periodically, as
indicated in the Maintenance Table (p. 44/45).
Oil and oil filter change :
1. Place the vehicle on a flat surface.
2. Run the engine so that once the oil is warm it can make any sediment rise
up. Then turn it off after a few minutes.
3. Place a container under the engine to collect the used oil and avoid any
spillage.
4. Remove the cap/dipstick level (1) and the two filler caps (2), to make it
easier to drain the oil.
5. Remove the drain cap/screw (3) and wait until all the content has emp-
tied out.
6. Remove the filter (4) and discard.
7. Put the new filter in place, lubricate the O-ring seal (5) and tighten man-
ually, without using any tools.
8. Tighten the cap/screw (3) replacing its washer.
9. Fill with new oil.
10. Ensure the tightness of the cap/dipstick level (1) and the filler caps (2),
with their O-ring.
11. Run the engine for a few minutes.
12. Stop the engine and after about 5 minutes, check the oil level again, as
per the instructions given for the oil level check.
TECHNICAL INFORMATION: Recommended oil: SAE 15W40 - API
CD, CF, CF-4 y CI-4 / ACEA E-5. Capacity: 1.7 L.
Tighten the drain cap/screw to 58 Nm.
The air cleaner cartridge: 02990000052
To ensure the smooth operation of the transmission and the engine
keep the oil at the optimum level and change it periodically, as indi-
cated in the Maintenance Table (p. 44/45).
Insufficient, degraded or contaminated oil can accelerate the wear
and tear of a vehicle and cause serious engine damage.
Regulations oblige garages to collect and store, without mixing,
hazardous or toxic waste, contaminated waste and inert non-haz-
ardous waste. Such waste may not be dumped and must rather be
processed by accredited managers.
1
2
3
4
5