manualshive.com logo in svg

CORVUS TERRAIN DX4 PRO, User Manual, Page: 22 / 80

Share
Download
CORVUS TERRAIN DX4 PRO User Manual Download Page 22

22

We reserve the right to modify the product and the design.

USER

MANUAL

LOCATION OF COMPONENTS

TRAILER

The vehicle has a tow ball, located at the rear of the vehicle. It is important 

to know its load limitations. For this purpose there is an homologation plate 

that indicates the following information.

Do not exceed 16km/h when towing a load nor drive the vehicle with 

the short gear (L) engaged.

Do not drive on sloped or dangerous grounds when towing loads. If 

dirving on diffult grounds is needed, reduce the speed significantly 

and constantly pay attention to elements that can be potentially 

dangerous for your safety.

When parking the vehicle with a trailer, it is important to do it on an 

horizontal surface. Do not park in slopes nor leave te vehicle with an 

engaged gear, as it will not prevent the vehicle from moving. Always 

use the parking brake. 

In order to improve vehicle stability and to reduce the effects of 

towing a load, it is convenient to distribute the load weight between 

cargo box and trailer if possible.

Secure the load to the trailer correctly and make sure the space 

between the trailer and the vehicle is free from any elements that 

could damage any of them or affect driving. 

In the upper part of the towing ball it can be found the 7-pin socket 

connector for towing. This socket has a maximum power of 150W, 

exceeding this power may result in serious damage in the electric 

system and must not be exceeded under any circumstance. This 

power will be reduced if there is something connected to any of the 

vehicle’s auxiliary power points.

The vehicle can only tow more than 450kg if the trailer is equipped 

with an inertia brake. Always without exceeding the maximum load 

supported by the vehicle.

Do not pull or tow objects from any other point on the vehicle than 

the winch (if available) or from the hitchs provided (one rear with tow 

ball and one front).

Never drive with passengers in the trailer.

The vehicle should be driven avoiding sharp turns or aggressive 

driving. Accelerate progressively and keep in mind that the braking 

distance will be affected by the trailer load.

Maximum towing capacity for a trailer WITH inertia 

brake

Maximum towing capacity for a trailer WITHOUT inertia 

brake

Maximum vertical towball load

907 kg

 

450 kg

240 kg

MODELO: CORVUS TERRAIN

Summary of Contents for TERRAIN DX4 PRO

















































































Reviews:

No comments