CORVUS TERRAIN DX4 PRO, User Manual

Page: 60 / 80

60 We reserve the right to modify the product and the design.
USER
MANUAL
radiator hosepipe and connections hand brake cable
Radiator hosepipes :
Check that the radiator hosepipes do not have cuts or are damaged and
that the connections do not have leaks.
Radiator:
Check that the radiator fins are not obstructed (insects or mud). Clean any
such obstructions with a jet of water at low pressure.
Using high pressure water can damage the radiator fins and diminish
the effectiveness. Do not obstruct or divert the air inlet to the radi-
ator by installing any unauthorized accessories. Interfering with the
radiator may cause it to overheat and damage the engine.
Replace the radiator if it is damaged or has lost efficiency.
To adjust the tension of the handbrake cable, follow this procedure:
1. Loosen the nut (1).
2. Adjust the angle between the cam and the handbrake cable. To do this, turn
the shaft (2) with a flat screwdriver. In this way, when the handbrake is applied,
this angle is 85°.
3. Fasten the nut (1).
4. Follow this process for the two brake callipers.
TECHNICAL INFORMATION
The cam must be adjusted in such a way that when the parking brake is
applied to its maximum extent, the angle of the cam with reference to
the cable has to be 85° ± 0.5.
Don’t execute this operation with the handbrake on. Only activate it
when the nut (1) is fastened.
1
2