CORVUS TERRAIN DX4 PRO User Manual Download Page 62

Page: 62 / 80

We reserve the right to modify the product and the design.

USER

MANUAL

tires

Check that the tires are not worn, cracked or damaged. Also check that

they are at the correct pressure.

Recommended front/rear pressure:

1.0 bar (empty vehicle)

1.5 bar (vehicle at full load)

Every day before you drive your vehicle you should check that all the nuts

and bolts are tight.

You should also check that the other fastenings are in place and in good

condition.

NEVER drive with lack of nuts or screws, this could cause an acci-

dent or serious damage.

bolts, nuts and fastenings

battery

The battery (12 V and 55 Ah) does not need maintenance.

The vehicle counts on 3 free auxiliar connectors with a maximum individual

charge capacity of 150W to 12V. Never exceed that capacity, it could avoid

having problems in the electric system or the battery..

These connectors are placed:

- Behind central botton panel of the dashboard (positive direct to

battery).

- Behind the roof upper botton panel (positive after contact).

- Left rear part of the vehicle (positive after contact.

Summary of Contents for TERRAIN DX4 PRO

















































































Search results

Summary of Contents for TERRAIN DX4 PRO

Reviews:

Related manuals for TERRAIN DX4 PRO

Brands by name

Popular brands

CORVUS TERRAIN DX4 PRO, User Manual

Search results

Summary of Contents for TERRAIN DX4 PRO

Reviews:

Related manuals for TERRAIN DX4 PRO

Brands by name

Popular brands