CORVUS TERRAIN DX4 PRO, User Manual

Page: 38 / 80

38
*: According to version.
We reserve the right to modify the product and the design.
USER
MANUAL
start-up process USE OF THE REAR DIFFERENTIAL LOCK AND UNLOCK
To begin driving with your CORVUS, follow these steps:
1. Step on the brake pedal, without stepping on the accelerator.
2. Put the gearshift lever in L, H or R, and choose the direction of travel.
3. Release the parking brake. Make sure that is completely disconnected.
4. Accelerate gently in the selected gear. When accelerating the vehicle, it is
possible that on occasions it may not move and it may make a small metallic
noise. This is due to the fact that the gear has not been fully engaged; in this
case, stop accelerating and wait for the engine to return to idling speed,
push the shift lever to select the gear ratio you want and accelerate gently
at the same time, you will notice a “click” on the shift lever which confirms
that the gear has been fully engaged. You can now release the gearshift
lever and start moving.
It is recommended to activate the rear differential lock with vehicle
completely stopped to minimise worn in the components.
NEVER be used in roads.
Failure to comply with this instruction can cause severe damage to
the engine.
To lock the rear differential perform the following steps:
1. Step on the brake pedal, without stepping on the accelerator.
2. Disconnect the hand brake. Make sure that is completely disconnected.
3. Put the gearshift lever into NEUTRAL (N) - central position.
To unlock the rear differential perform the following steps:
1. With the vehicle completely stopped, step on the brake pedal,
without stepping on the accelerator.
2. Put the gearshift lever into NEUTRAL (N) - central position.