CORVUS TERRAIN DX4 PRO User Manual Download Page 57

Page: 57 / 80

We reserve the right to modify the product and the design.

USER

MANUAL

front low and high beam lights and indicators

Bulbs and headlights can be very hot.

Replacement:

1. Switch the vehicle off.

2. Open the front hood.

3. Remove the base of the hood (p. 55)

Replacing the low / high beam lamps:

1. Unplug the electrical connector (1) of the lamp you are replacing.

2. Turn the bulb counterclockwise to remove it from its housing.

TECHNICAL INFORMATION:

Low and high beam headlamps: HB3 12V 60W,

Ref. 09180040003.

Replacing the indicator lamps:

1. To replace the indicator lamps, turn the bulb holder bushing (2) counter-

clockwise to disconnect it from its housing.

2. Turn the lamp and separate it from the bushing.

TECHNICAL INFORMATION:

Indicators lamp: 12V 21W,

Ref. 08000960000

Do not drive the vehicle without lights or indicator lamps, they

represent an important safety measure.

Summary of Contents for TERRAIN DX4 PRO

















































































Search results

Summary of Contents for TERRAIN DX4 PRO

Reviews:

Related manuals for TERRAIN DX4 PRO

Brands by name

Popular brands

CORVUS TERRAIN DX4 PRO, User Manual

Search results

Summary of Contents for TERRAIN DX4 PRO

Reviews:

Related manuals for TERRAIN DX4 PRO

Brands by name

Popular brands