CORVUS TERRAIN DX4 PRO User Manual Download Page 12

Page: 12 / 80

*: According to version.

We reserve the right to modify the product and the design.

USER

MANUAL

LOCATION OF COMPONENTS

LIGHT SWITCH

Located to the left of the steering wheel, with the following functions:

-Activation of the horn

Push the lever toward the centre of the vehicle

-Flash function

Pull the lever toward the inside

-Long beam or road lights

Push the lever away from you

-Turn signal lamps

Move the lever upward (to turn right) and down (to turn left).

The side, dipped-beam or short lamps will turn on automatically when you

connect the engine.

WINDSHIELD WIPER / WASHER BUTTON

Located above the driving seat.

-WINDSHIELD WIPER

OFF Position

- Lower position

ON Position

- Central position

-WINDSHIELD WASHER

ON Position

- Upper position

Summary of Contents for TERRAIN DX4 PRO

















































































Search results

Summary of Contents for TERRAIN DX4 PRO

Reviews:

Related manuals for TERRAIN DX4 PRO

Brands by name

Popular brands

CORVUS TERRAIN DX4 PRO, User Manual

Search results

Summary of Contents for TERRAIN DX4 PRO

Reviews:

Related manuals for TERRAIN DX4 PRO

Brands by name

Popular brands