CORVUS TERRAIN DX4 PRO User Manual Download Page 37

Page: 37 / 80

We reserve the right to modify the product and the design.

USER

MANUAL

start-up process

Follow these steps to start up your CORVUS:

1. Place the gearstick (1) in the N position (neutral).

2. Step on the brake pedal without stepping on the accelerator.

3. Turn the key (2) to the heater position and wait a few seconds in that

position until the “diesel heaters” signal turns off.

4. Then turn the key (2) until the engine starts turning over.

5. Once you have started up the engine, let go of the ignition key.

NOTE:

Make sure that the engine maintains a minimum idling speed of 1.250 rpm.

The gearshift lever must be operated with the vehicle completely

stopped and the engine running at the minimum possible level,

without accelerating.

Failure to comply with this instruction can cause severe damage to

the transmission.

Do not drive with the hand brake on.

Do not operate the hand brake to stop the vehicle. Doing so can

cause serious damage to the braking system of the vehicle and can

be dangerous. When moving into gear, accelerate gently, avoiding

abrupt accelerations.

Before starting the engine, make sure the gearshift lever is in neutral.

Do not accelerate.

Failure to comply with this instruction can cause severe damage to

the transmission.

Summary of Contents for TERRAIN DX4 PRO

















































































Search results

Summary of Contents for TERRAIN DX4 PRO

Reviews:

Related manuals for TERRAIN DX4 PRO

Brands by name

Popular brands

CORVUS TERRAIN DX4 PRO, User Manual

Search results

Summary of Contents for TERRAIN DX4 PRO

Reviews:

Related manuals for TERRAIN DX4 PRO

Brands by name

Popular brands