Cormach MEC 810VD-VDL-VDBL, Use And Maintenance Manual, Page: 70 / 78

Use and Maintenance Manual – 08/2018 Rel. 3 Page 65
040
Confirm activation of the MILLIMETERS work program by pressing
[P6] on the keyboard .
050
Activate the work program in MILLIMETERS by selecting ,
ensure that status icon is activated.
21.8 Select weight material in Fe/Zn or Pb
This button allows you to select the balancing weight material. The options available are listed in table T21.3. The selection of the
material type slightly changes the balancing results because the weights in Iron/Zinc are lighter than those in Lead and therefore are
larger. The machine takes account of these differences when calculating the imbalance.
Table T21.3: Balancing weights materials
Option Type of balancing weight material Notes
Fe Iron or Zinc This material has been set by default.
Pb
Lead In some countries (such as those of the European Community), Lead
weights are prohibited by law.
To change the MATERIAL OF THE BALANCING WEIGHTS, proceed as described below:
Phase Description
010
Press [P1] or [P3] on the keyboard
and select the icon relative to the program to be used.