Use and Maintenance Manual – 08/2018 Rel. 3
Page 23
210
On the outer side of the wheel, at 12 o'clock, apply the 50 g
weight.
220
Lower the wheel guard: the machine will run a launch.
225
For MEC 820VD: keep the wheel guard lowered.
230
If the MEC 820VD is equipped with the electromagnetic
brake for positioning, at the end of the previous spin the
machine will perform a set of short spins to calibrate the
function of automatic stop on imbalance position
(see
chapter
SWI Stop the wheel on imbalance
)
.
Do not lift the
wheel guard and do not press [9] key
during this
procedure.
240
Calibration is finished: the machine automatically exits the
calibration program and returns to the NORMAL mode, ready to
perform the balancing.
How to exit the CAR/SUV wheel type calibration of the machine
At any time it is always possible to exit the calibration procedure during its progress by pressing [P5] key
.
Summary of Contents for MEC 810VD-VDL-VDBL
Page 2: ......
Page 77: ...Use and Maintenance Manual 08 2018 Rel 3 Page 72...
