Use and Maintenance Manual – 08/2018 Rel. 3
Page 32
17.2.1 CAR wheel type (auto-vehicles)
The selection of the CAR Wheel Type allows the balancing of wheels of auto-vehicles. For OFF-ROAD vehicles, it may be appropriate
to select the SUV Wheel Type (see paragraph below).
To select the CAR wheel type, proceed as described below:
Phase
Description
010
Press [P1] or [P3]
on keyboard
and
select the icon relative to the program to be used.
020
Activate the AUTO program by selecting
(by default at
power on) which will turn blue. Ensure that the status icon
is activated.
17.2.2 MOTO wheel type (motorbikes)
The selection of MOTO wheel type allows the balancing for the motorbike wheels.
These wheels must be fit on the shaft by using a specific motorcycle wheel adaptor. Since the motorcycle adaptor keeps farer the
wheel from the machine, it is necessary to install an appropriate extension for the distance sensor.
To select the MOTO wheel type, proceed as described below:
Phase
Description
010
Press [P1] or [P3]
on keyboard
and
select the icon relative to the program to be used.
Summary of Contents for MEC 810VD-VDL-VDBL
Page 2: ......
Page 77: ...Use and Maintenance Manual 08 2018 Rel 3 Page 72...
