Cormach MEC 810VD-VDL-VDBL, Use And Maintenance Manual, Page: 39 / 78

Use and Maintenance Manual – 08/2018 Rel. 3 Page 34
17.2.3 SUV wheel type (Off-Roads vehicles)
The selection of SUV wheel type allows the balancing of wheels for off-road vehicles. These vehicles are generally equipped with
wheels that are larger than normal and the tyre is relatively large compared to the diameter of the rim (that means not the low profile
or super low profile types).
The selection for this wheel type doesn’t allow to balance the truck wheels, because the profiles for those rims are considerably
different. The choice of the CAR or SUV wheel type is at the discretion of the operator who should run balancing test to determine
which wheel type gives the best results for the particular wheel that is subject to balancing.
To select the SUV wheel type, proceed as described below:
Phase Description
010
Press [P1] or [P3] on keyboard and
select the icon relative to the program to be used.
020
Activate the AUTO program by selecting (by default at
power on) which will turn blue.
030
Scroll through the list of available programs by pressing [P2] or
[P4] on keyboard and
activate the SUV program by selecting . Ensure that the
status icon is activated.
For SUV wheel type all Programs Type listed in table T17.1 are available. The positions of the weights along the section of the rim are
the same as those shown in figure F17.1.