Use and Maintenance Manual – 08/2018 Rel. 3
Page 6
6.2 Installing external sensor (if present)
When present, the external sensor must be installed according to the figures provided below.
Figure F6.10: Remove external sensor from the packaging.
Figure F6.11 and Figure F6.12: There are holes at the back of the wheel balancer to attach the external sensor. Place the flange of
external sensor on the three holes.
Figure F6.13: Square the external sensor using a level. Tighten the 3 M6 screws.
Figure F6.14: Connect the cable of the external sensor to the machine and screw on the connector.
Summary of Contents for MEC 810VD-VDL-VDBL
Page 2: ......
Page 77: ...Use and Maintenance Manual 08 2018 Rel 3 Page 72...
